PMSM Motor ME0201013001
Product Description
Designed for long life. No brush maintenance. The motor is 90% efficient at voltages between 24 to 48 VDC. Continuous current of 100 amps at 48 VDC. This is a 3-phase, Y-connected Permanent Magnet Syncronous Motor with an axial air gap.
20 turns per phase Line to Line resistance of 0.013 ohms Motor weight of 22 pounds.
20 turns per phase Line to Line resistance of 0.013 ohms Motor weight of 22 pounds.
Accessories
Motor Control used for battery operated floor care equipment. Designed for 36 VDC battery systems. Provides 90 amps continuous, 140 amps peak. Output is 3.5 HP continuous, with constant speed independent of load and battery voltage. This is a fixed speed control with settings from 1500 to 2500 rpm in 100 rpm increments. True sine wave excitation from 3 hall cell input. $300.00 | Motor control originally designed for an electric outboard, but can be used for inboard boats too. Battery voltage of 48 VDC prefered, but also works on 36 VDC. Current 70 amps continuous which equates to 3.5 hp at 48 VDC. Use with Brushless Motor ME0201013001. Electronic forward and reverse, and variable speed. $350.00 |
This Motor Control can be used for battery operated equipment. Designed for 36 VDC battery systems. Provides 90 amps continuous, 140 amps peak. Output is 3.5 HP continuous, with constant speed independent of load and battery voltage. This is a fixed speed control with settings from 1500 to 2500 rpm in 100 rpm increments. True sine wave excitation from 3 hall cell input. The control is similar to the ME0502B control except the motor must be stopped (not rotating) for the control to start-up. $60.00 | Hall Cell Assembly Connector ME0808 This is the mating connector for the Hall Cell Assembly used on the axial air gap brushless motors. Comes with all 5 pins fully assembled and crimped, with a 6 inch lead. $12.88 |
